Connect with us

News

Tanzania: Simba’s Pablo Plot Red Arrows Fall

Published

on

SIMBA’ S Head Coach Pablo Franco said his team now focuses on their CAF Confederation Cup match against Red Arrows of Zambia after seeing off Ruvu Shooting here on Friday.

Speaking here after Simba defeated Ruvu Shooting 3-1 at CCM Kirumba Stadium, the Spanish Coach said they have enough time to prepare for their match against Zambians.

He said they will spend the whole week preparing for their Confederations Cup match against the Red Arrows at Benjamin Mkapa Stadium on November 28 this year.

Commenting on their match against Ruvu Shooting, Pablo said they still have a lot of work to do after the match to enable the team to drill well for both local and foreign assignments.

“My team played very well especially in the first half and our plan was well achieved,” Pablo.

Commenting on playing Morrison as a midfielder, Pablo said it was part of his plans and he decided to test him there due to the late return of his midfielders Larry Bwalya and Peter Banda.

He congratulated his players for a good game despite missing a penalty in the second half.

On his side Ruvu Shooting’s Assistant Coach, Mohamed Nakuchema said they did not expect the results. He said their opponents dominated the match in each position.

In the Premier League standings, Simba are at the second place with 14 points after playing six games. They have won four matches against Namungo, Dodoma Jiji, and Polisi Tanzania before beating Ruvu Shooting.

The defending champions have drawn two matches against Coastal union and Biashara United. They have netted six goals.

Ruvu Shooting are placed 11th with 6 points. The team has won two matches against Coastal union and Biashara United. The team have lost four matches against Yanga, Simba, Police Tanzania and Dodoma Jiji.

News

OTS scheme for defaulting e-way plot allottees extended up to Dec 31 | Noida News

Published

on

Greater Noida: The one-time settlement scheme launched by the Yamuna Expressway Authority for defaulting property allottees has been extended up to December 31. The scheme was drawing to a close on November 30, but the extension of another month has been provided to the allottees to seek the benefits being offered, officials have said.
More than 32,000 allottees stand to benefit through the scheme that was launched on October 1. The scheme is open for allottees under all the seven categories — residential, build-up housing scheme, institutional, industrial, commercial, mix-land use and abadi plots. For the first time, YEIDA had agreed to waive off the compounded penal interest component on the entire dues and levy only simple interest.
But instead of offline mode, the scheme was offered through a web portal. However, for the first fortnight or so, the portal did not function properly. “We told YEIDA to resolve the technical snags. Allottees were unable to submit their details online and whatever was entered could not be saved as draft,” said general secretary of the Yamuna Expressway Entrepreneurs Association, Rishabh Nigam.
Chief executive officer of the Authority, Arun Vir Singh said, “We are going to press only 8.50% simple interest to calculate the land premium dues. Some allottees sought more time to arrange for funds and hence we have extended the deadline.”
An applicant having dues up to Rs 50 lakh will have to pay up one-third of the restructured amount within a month and the balance two-third within three months. Those having more than Rs 50 lakh to settle will also have to pay up a third of the amount within a month. However such allottees will be given six months to pay up the remaining sum.

Continue Reading

News

Tesla’s Giga casting strategy to be adopted by half a dozen other automakers

Published

on

Tesla’s approach to using giant casting machines, nicknamed Giga Press, to make car bodies with just a few massive casted parts is catching on in the auto industry.

A Tesla supplier says that it is working with about half a dozen other automakers taking the same approach.

Over the last few years, Tesla has been heavily investing in casting and alloy technology to enable larger casted parts that have the capability to greatly simplify manufacturing.

The company acquired several units of the biggest casting machines in the world. They have been deployed at Tesla’s factories in the US, Berlin, and China.

Tesla has already been producing the Model Y with a single rear body piece that replaced 70 different parts in the vehicle.

Earlier this year, a picture of the first single front casting part of the Model Y produced at Gigafactory Texas leaked.

Last month, we reported that Tesla produced the first Model Y with both front and back single-piece casting.

The strategy to greatly reduce the number of pieces to make a car body results in a massive reduction in the complexity of the body line and the capital needed to build the production line.

It also brings weight advantage to the vehicle itself, which in turn can improve efficiency. However, it’s not all advantage.

Some people in the industry have been critical of the cost associated with potential repair in the event of an accident. This is led to questions whether Tesla is leading a new way for the auto industry to build cars in the future or if it was a fool’s errand.

But now it looks like some other automakers are willing to give it a shot, especially in China.

The New York Times published a report on Liu Siong Song, an engineer behind LK Technology, a partner in Tesla’s casting technology.

Liu said that he is working with six Chinese automakers to deploy similar casting technology as soon as next year:

“In addition to Tesla, LK will supply similar giant casting machines to six Chinese companies by early 2022 as more automakers adopt Tesla’s way of making cars, Mr. Liu said.”

However, the engineer suggests that they might run into some issues:

“For all China’s progress, it still has a long way to go. LK hopes to deliver the same types of casting machines to many Chinese companies in the next two years. But some of those companies are struggling to find car designers of the type and talent that Tesla has aplenty. Without the designs, LK can’t deliver the machines.”

Aside from designs, other automakers might also run into some issues with materials.

Tesla has long invested in material science to develop its own alloys to support such large casting parts. The automaker even partnered with SpaceX to share material science talent to develop those alloys.

FTC: We use income earning auto affiliate links. More.


Subscribe to Electrek on YouTube for exclusive videos and subscribe to the podcast.

Continue Reading

News

Entertainment District Arc Release Date & What to Expect

Published

on

Demon Slayer rounded out its Mugen Train Arc on Nov. 28, bringing Tanjiro’s mission with the Flame Hashira to a bittersweet end. Although “Set Your Heart Ablaze” will no doubt have fans feeling emotional, the conclusion of this arc also gives them a reason to be excited. The anime will officially move into never-before-seen territory with its next episode, which will kick off Demon Slayer Season 2’s Entertainment District Arc. What can fans expect from this new chapter, and when will it begin?

When does ‘Demon Slayer’s Entertainment District Arc start?

Official poster art for the 'Demon Slayer' Season 2 Entertainment District Arc being adapted from the manga to the anime.

Official art for ‘Demon Slayer’s Entertainment District Arc | ©Koyoharu Gotouge/SHUEISHA, Aniplex, ufotable

RELATED: ‘Demon Slayer’: How Many Arcs Does the Manga Have in Total? There’s Virtually No Filler

Continue Reading

Trending